Home Syllabus EEE SYLLABUS GE8261 ENGINEERING PRACTICES LABORATORY SYLLABUS 2017 REGULATION

GE8261 ENGINEERING PRACTICES LABORATORY SYLLABUS 2017 REGULATION

0
5591

GE8261 ENGINEERING PRACTICES LABORATORY SYLLABUS 2017 REGULATION

ANNA UNIVERSITY CHENNAI EEE SYLLABUS 2017 REGULATION FOR GE8261 ENGINEERING PRACTICES LABORATORY SYLLABUS 2017 REGULATION 

GE8261 ENGINEERING PRACTICES LABORATORY SYLLABUS 2017 REGULATION

Anna University GE8261 ENGINEERING PRACTICES LABORATORY SYLLABUS 2017 Regulation has been revised for the Students who joined in the academic year 2017-2018. So revised syllabus for Anna University Chennai Electrical and electronics engineering syllabus 2017 Regulation is given below. you can download GE8261 ENGINEERING PRACTICES LABORATORY Regulation 2017 2nd Semester eee Syllabus from the below link. Syllabus 2017 regulation for 1st 2nd 3rd 4th 5th 6th 7th 8th Semester will be updated shortly and same can be downloaded year as soon as University announces. Anna University 1st year Syllabus Regulation 2017 is given below. GE8261 Syllabus for Regulation 2017 Students can be downloaded here.

GE8261 ENGINEERING PRACTICES LABORATORY                                            L T P C
                                                                                                                            0 0 4 2
OBJECTIVES:

To provide exposure to the students with hands on experience on various basic engineering
practices in Civil, Mechanical, Electrical and Electronics Engineering.

GROUP A (CIVIL & MECHANICAL)

I CIVIL ENGINEERING PRACTICE                                13

Buildings:
(a) Study of plumbing and carpentry components of residential and industrial buildings.
Safety aspects.
Plumbing Works:
(a) Study of pipeline joints, its location and functions: valves, taps, couplings, unions, reducers,
elbows in household fittings.
(b) Study of pipe connections requirements for pumps and turbines.
(c) Preparation of plumbing line sketches for water supply and sewage works.
(d) Hands-on-exercise:
Basic pipe connections – Mixed pipe material connection – Pipe connections with different
joining components.
(e) Demonstration of plumbing requirements of high-rise buildings.
Carpentry using Power Tools only:
(a) Study of the joints in roofs, doors, windows and furniture.
(b) Hands-on-exercise:
Wood work, joints by sawing, planing and cutting.

II MECHANICAL ENGINEERING PRACTICE                18

Welding:
(a) Preparation of butt joints, lap joints and T- joints by Shielded metal arc welding.
(b) Gas welding practice
Basic Machining:
(a) Simple Turning and Taper turning
(b) Drilling Practice
Sheet Metal Work:
(a) Forming & Bending:
(b) Model making – Trays and funnels.
(c) Different type of joints.
Machine assembly practice:
(a) Study of centrifugal pump
(b) Study of air conditioner
Demonstration on:
(a) Smithy operations, upsetting, swaging, setting down and bending. Example – Exercise – Production of hexagonal headed bolt.
(b) Foundry operations like mould preparation for gear and step cone pulley.
(c) Fitting – Exercises – Preparation of square fitting and V – fitting models.

GROUP B (ELECTRICAL & ELECTRONICS)

III ELECTRICAL ENGINEERING PRACTICE                13

1. Residential house wiring using switches, fuse, indicator, lamp and energy meter.
2. Fluorescent lamp wiring.
3. Stair case wiring
4. Measurement of electrical quantities – voltage, current, power & power factor in RLC circuit.
5. Measurement of energy using single phase energy meter.
6. Measurement of resistance to earth of an electrical equipment.

IV ELECTRONICS ENGINEERING PRACTICE             16

1. Study of Electronic components and equipments – Resistor, colour coding measurement
of AC signal parameter (peak-peak, rms period, frequency) using CR.
2. Study of logic gates AND, OR, EX-OR and NOT.
3. Generation of Clock Signal.
4. Soldering practice – Components Devices and Circuits – Using general purpose
PCB.
5. Measurement of ripple factor of HWR and FWR.

TOTAL: 60 PERIODS

OUTCOMES:

On successful completion of this course, the student will be able to

  • fabricate carpentry components and pipe connections including plumbing works.
  • use welding equipments to join the structures.
  • Carry out the basic machining operations
  • Make the models using sheet metal works Illustrate on centrifugal pump, Air conditioner, operations of smithy, foundary and fittings
  • Carry out basic home electrical works and appliances
  • Measure the electrical quantities
  • Elaborate on the components, gates, soldering practices.LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS:

    CIVIL

    1. Assorted components for plumbing consisting of metallic pipes,
    plastic pipes, flexible pipes, couplings, unions, elbows, plugs and
    other fittings. 15 Sets.
    2. Carpentry vice (fitted to work bench) 15 Nos.
    3. Standard woodworking tools 15 Sets.
    4. Models of industrial trusses, door joints, furniture joints 5 each
    5. Power Tools: (a) Rotary Hammer 2 Nos
    (b) Demolition Hammer 2 Nos
    (c) Circular Saw 2 Nos
    (d) Planer 2 Nos
    (e) Hand Drilling Machine 2 Nos
    (f) Jigsaw 2 Nos

  • MECHANICAL

    1. Arc welding transformer with cables and holders 5 Nos.
    2. Welding booth with exhaust facility 5 Nos.
    3. Welding accessories like welding shield, chipping hammer,
    wire brush, etc. 5 Sets.
    4. Oxygen and acetylene gas cylinders, blow pipe and other
    welding outfit. 2 Nos.
    5. Centre lathe 2 Nos.
    6. Hearth furnace, anvil and smithy tools 2 Sets.
    7. Moulding table, foundry tools 2 Sets.
    8. Power Tool: Angle Grinder 2 Nos
    9. Study-purpose items: centrifugal pump, air-conditioner One each.

  • ELECTRICAL

  • 1. Assorted electrical components for house wiring 15 Sets
    2. Electrical measuring instruments 10 Sets
    3. Study purpose items: Iron box, fan and regulator, emergency lamp 1 each
    4. Megger (250V/500V) 1 No.
    5. Power Tools: (a) Range Finder 2 Nos
    (b) Digital Live-wire detector 2 Nos
  • ELECTRONICS

    1. Soldering guns 10 Nos.
    2. Assorted electronic components for making circuits 50 Nos.
    3. Small PCBs 10 Nos.
    4. Multimeters 10 Nos.
    5. Study purpose items: Telephone, FM radio, low-voltage power
    supply

NO COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here

ARE YOU READY? GET IT NOW!
Join more than 5000+ of Email Subscribers!
Your Information will never be shared with any third party.